Non-standard enemy frequencies
The occupiers constantly modify drone firmware and switch to shifted frequency ranges that aren't covered by conventional trench EW systems.
Custom engineering solutions for electronic protection
Development, modernisation and adaptation of EW and radar systems for unique tactical requirements and non-standard combat tasks.
Designing and creating bespoke electronic-warfare, UAV-suppression and radar systems for unique technical requirements, specific frequency ranges and special operating conditions on the front line.
- Changing and expanding frequencies
- Modification and prototyping
- Deep integration
- Upgrading existing systems
- Custom development
The average time for our engineers to complete an initial analysis of a task is up to 24 hours.
When standard solutions aren't enough
The dynamics of modern technological confrontation demand flexible engineering changes. Standard mass-produced products often have limitations, which we eliminate through custom design for a specific scenario.
Specific mounting and power conditions
The need to integrate protective modules onto non-standard vehicles (buggies, boats, armoured vehicles, robotic platforms) or connect them to specific onboard networks.
The need for combined systems
When completing a combat mission requires combining detection (detectors) and suppression (active EW) into a single coordinated, synchronised loop.
Difficult terrain and climate conditions
Protecting fixed sites or operating in specific zones where standard antennas create "blind spots" or suffer critical overheating during prolonged operation.
Areas of custom development
We create solutions that don't just protect but give a technological edge in a specific mission area.
Specialised EW systems
Design and assembly of systems from scratch for unique radio signatures and specific tactical scenarios. Creating a custom architecture of internal boards and signal filtering to operate in areas with high interference density.
Upgrades and frequency expansion
Updating and refining devices already in service with units. Fast replacement of frequency modules, boosting overall system power and adapting to new enemy UAV firmware.
Integration onto vehicles and platforms
Development of mounting and connection systems for EW on the onboard networks of any type of vehicle: from light quad bikes and buggies to armoured vehicles and boats. Creating autonomous power circuits without overloading the vehicle's generator.
Rapid prototyping (R&D)
A fast development cycle: from creating a 3D model of the housing, calculating thermal regulation (cooling) and etching boards, to the first field tests of the prototype at our own range.
Stages of work
From technical brief to combat deployment. We've built a clear engineering cycle that lets us deliver complex projects in tight timeframes without losing quality.
Analysis and audit
A detailed study of the tactical task, analysis of the current radio-frequency threat spectrum and the conditions in which the system will operate.
Design
Developing the system architecture, selecting the component base, 3D modelling of the housing and calculating cooling systems.
Development and assembly
Manufacturing printed circuit boards, mounting modules, writing software and final assembly of the prototype.
Range testing
A series of rigorous trials at our own range against real attack systems to confirm the stated characteristics.
24/7 support
Handover of the product to the customer, crew training, and continuous technical support and firmware updates on request.
The foundation of our effectiveness
We combine combat experience with advanced engineering solutions to deliver uncompromising resilience and an edge in every operation.
NATO codification
Our products have passed official codification to NATO standards, which reflects their high quality and compliance with strict international requirements.
Highest quality
We offer the best price-to-quality ratio on the market, guaranteeing the reliability of every component in the most demanding operating conditions.
Ukrainian manufacturing
We ensure 93% Ukrainian manufacturing across all our components, supporting the local economy and maintaining full control over every stage.
Individual approach
We can tailor the technical specifications to your request, creating solutions for specific needs and combat tasks.
Fast delivery
Our team promptly processes and ships your order in the shortest possible time, providing logistics across the whole of Ukraine without delays.
Technical support
We provide high-quality consulting and full technical support throughout the equipment's service life, including training and service support.
Contra-Drone: expertise proven over time
We develop and deploy advanced electronic-warfare systems that provide uncompromising protection against unmanned aerial vehicles.
6,500+
Units of EW systems already successfully carrying out combat missions
2 years
Of experience on the Ukrainian market developing innovative defence solutions
93%
Components of our own Ukrainian manufacturing for full quality control
90%
Of the Contra-Drone line of devices have passed official NATO codification
Frequently asked questions
1. Review and familiarise yourself with all the EW systems and services on the website.
2. Fill in the order form on the site or call us:
to order EW: +380 98 645 40 10
to order a detector: +380 68 234 37 58
3. Our manager will contact you to clarify all the details and give recommendations on choosing the right EW device or detector.
4. We will prepare all the necessary documents and conclude a contract.
5. Receive your order delivered to the specified address, and our team will install and set up the equipment.
Contra-drone offers 3 delivery methods:
1. self-pickup;
2. delivery via Nova Poshta;
3. courier delivery to your address via Nova Poshta.
Contra-drone devices cover:
200-1200 MHz, 1500-1700 MHz, 2000-2200 MHz, 2200-2500 MHz, 2390-2500 MHz, 2500-2750 MHz, as well as 5.2 GHz and 5.8 GHz
Yes, it’s possible. Contra-drone can individually adapt the modules, frequency range, antennas and other technical specifications to your request.
Yes, we have a ready contract template for placing and paying for an order.
For convenience, the contract in DOC format is attached in the main menu, where you can review it.
We test our equipment both at a testing centre, which lets us check individual components and functions in controlled situations, and in field conditions, where we evaluate the system’s effectiveness in a real or near-real environment.
To install and operate our devices, you must follow the instructions supplied with the equipment. We also offer professional installation and setup to ensure optimal device performance.
We provide technical support and maintenance throughout the device’s entire service life. If you have any questions or problems, you can call:
+380 63 743 59 19
or email us at contradrone13@gmail.com
Have a non-standard technical brief?
Describe the specifics of your task or upload an existing brief. Our engineers will carry out an initial analysis of frequencies and specifications within 24 hours. Full confidentiality guaranteed.
